1. Building a JIT: Starting out with KaleidoscopeJIT

1.1. Chapter 1 Introduction

Warning: This tutorial is currently being updated to account for ORC API changes. Only Chapters 1 and 2 are up-to-date.

Example code from Chapters 3 to 5 will compile and run, but has not been updated

Welcome to Chapter 1 of the “Building an ORC-based JIT in LLVM” tutorial. This tutorial runs through the implementation of a JIT compiler using LLVM’s On-Request-Compilation (ORC) APIs. It begins with a simplified version of the KaleidoscopeJIT class used in the Implementing a language with LLVM tutorials and then introduces new features like concurrent compilation, optimization, lazy compilation and remote execution.

The goal of this tutorial is to introduce you to LLVM’s ORC JIT APIs, show how these APIs interact with other parts of LLVM, and to teach you how to recombine them to build a custom JIT that is suited to your use-case.

The structure of the tutorial is:

  • Chapter #1: Investigate the simple KaleidoscopeJIT class. This will introduce some of the basic concepts of the ORC JIT APIs, including the idea of an ORC Layer.

  • Chapter #2: Extend the basic KaleidoscopeJIT by adding a new layer that will optimize IR and generated code.

  • Chapter #3: Further extend the JIT by adding a Compile-On-Demand layer to lazily compile IR.

  • Chapter #4: Improve the laziness of our JIT by replacing the Compile-On-Demand layer with a custom layer that uses the ORC Compile Callbacks API directly to defer IR-generation until functions are called.

  • Chapter #5: Add process isolation by JITing code into a remote process with reduced privileges using the JIT Remote APIs.

To provide input for our JIT we will use a lightly modified version of the Kaleidoscope REPL from Chapter 7 of the “Implementing a language in LLVM tutorial”.

Finally, a word on API generations: ORC is the 3rd generation of LLVM JIT API. It was preceded by MCJIT, and before that by the (now deleted) legacy JIT. These tutorials don’t assume any experience with these earlier APIs, but readers acquainted with them will see many familiar elements. Where appropriate we will make this connection with the earlier APIs explicit to help people who are transitioning from them to ORC.

1.2. JIT API Basics

The purpose of a JIT compiler is to compile code “on-the-fly” as it is needed, rather than compiling whole programs to disk ahead of time as a traditional compiler does. To support that aim our initial, bare-bones JIT API will have just two functions:

  1. Error addModule(std::unique_ptr<Module> M): Make the given IR module available for execution.

  2. Expected<ExecutorSymbolDef> lookup(): Search for pointers to symbols (functions or variables) that have been added to the JIT.

A basic use-case for this API, executing the ‘main’ function from a module, will look like:

JIT J;
J.addModule(buildModule());
auto *Main = J.lookup("main").getAddress().toPtr<int(*)(int, char *[])>();
int Result = Main();

The APIs that we build in these tutorials will all be variations on this simple theme. Behind this API we will refine the implementation of the JIT to add support for concurrent compilation, optimization and lazy compilation. Eventually we will extend the API itself to allow higher-level program representations (e.g. ASTs) to be added to the JIT.

1.3. KaleidoscopeJIT

In the previous section we described our API, now we examine a simple implementation of it: The KaleidoscopeJIT class [1] that was used in the Implementing a language with LLVM tutorials. We will use the REPL code from Chapter 7 of that tutorial to supply the input for our JIT: Each time the user enters an expression the REPL will add a new IR module containing the code for that expression to the JIT. If the expression is a top-level expression like ‘1+1’ or ‘sin(x)’, the REPL will also use the lookup method of our JIT class find and execute the code for the expression. In later chapters of this tutorial we will modify the REPL to enable new interactions with our JIT class, but for now we will take this setup for granted and focus our attention on the implementation of our JIT itself.

Our KaleidoscopeJIT class is defined in the KaleidoscopeJIT.h header. After the usual include guards and #includes [2], we get to the definition of our class:

#ifndef LLVM_EXECUTIONENGINE_ORC_KALEIDOSCOPEJIT_H
#define LLVM_EXECUTIONENGINE_ORC_KALEIDOSCOPEJIT_H

#include "llvm/ADT/StringRef.h"
#include "llvm/ExecutionEngine/Orc/CompileUtils.h"
#include "llvm/ExecutionEngine/Orc/Core.h"
#include "llvm/ExecutionEngine/Orc/ExecutionUtils.h"
#include "llvm/ExecutionEngine/Orc/IRCompileLayer.h"
#include "llvm/ExecutionEngine/Orc/JITTargetMachineBuilder.h"
#include "llvm/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.h"
#include "llvm/ExecutionEngine/SectionMemoryManager.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/LLVMContext.h"
#include <memory>

namespace llvm {
namespace orc {

class KaleidoscopeJIT {
private:
  ExecutionSession ES;
  RTDyldObjectLinkingLayer ObjectLayer;
  IRCompileLayer CompileLayer;

  DataLayout DL;
  MangleAndInterner Mangle;
  ThreadSafeContext Ctx;

public:
  KaleidoscopeJIT(JITTargetMachineBuilder JTMB, DataLayout DL)
      : ObjectLayer(ES,
                    []() { return std::make_unique<SectionMemoryManager>(); }),
        CompileLayer(ES, ObjectLayer, ConcurrentIRCompiler(std::move(JTMB))),
        DL(std::move(DL)), Mangle(ES, this->DL),
        Ctx(std::make_unique<LLVMContext>()) {
    ES.getMainJITDylib().addGenerator(
        cantFail(DynamicLibrarySearchGenerator::GetForCurrentProcess(DL.getGlobalPrefix())));
  }

Our class begins with six member variables: An ExecutionSession member, ES, which provides context for our running JIT’d code (including the string pool, global mutex, and error reporting facilities); An RTDyldObjectLinkingLayer, ObjectLayer, that can be used to add object files to our JIT (though we will not use it directly); An IRCompileLayer, CompileLayer, that can be used to add LLVM Modules to our JIT (and which builds on the ObjectLayer), A DataLayout and MangleAndInterner, DL and Mangle, that will be used for symbol mangling (more on that later); and finally an LLVMContext that clients will use when building IR files for the JIT.

Next up we have our class constructor, which takes a JITTargetMachineBuilder` that will be used by our IRCompiler, and a DataLayout that we will use to initialize our DL member. The constructor begins by initializing our ObjectLayer. The ObjectLayer requires a reference to the ExecutionSession, and a function object that will build a JIT memory manager for each module that is added (a JIT memory manager manages memory allocations, memory permissions, and registration of exception handlers for JIT’d code). For this we use a lambda that returns a SectionMemoryManager, an off-the-shelf utility that provides all the basic memory management functionality required for this chapter. Next we initialize our CompileLayer. The CompileLayer needs three things: (1) A reference to the ExecutionSession, (2) A reference to our object layer, and (3) a compiler instance to use to perform the actual compilation from IR to object files. We use the off-the-shelf ConcurrentIRCompiler utility as our compiler, which we construct using this constructor’s JITTargetMachineBuilder argument. The ConcurrentIRCompiler utility will use the JITTargetMachineBuilder to build llvm TargetMachines (which are not thread safe) as needed for compiles. After this, we initialize our supporting members: DL, Mangler and Ctx with the input DataLayout, the ExecutionSession and DL member, and a new default constructed LLVMContext respectively. Now that our members have been initialized, so the one thing that remains to do is to tweak the configuration of the JITDylib that we will store our code in. We want to modify this dylib to contain not only the symbols that we add to it, but also the symbols from our REPL process as well. We do this by attaching a DynamicLibrarySearchGenerator instance using the DynamicLibrarySearchGenerator::GetForCurrentProcess method.

static Expected<std::unique_ptr<KaleidoscopeJIT>> Create() {
  auto JTMB = JITTargetMachineBuilder::detectHost();

  if (!JTMB)
    return JTMB.takeError();

  auto DL = JTMB->getDefaultDataLayoutForTarget();
  if (!DL)
    return DL.takeError();

  return std::make_unique<KaleidoscopeJIT>(std::move(*JTMB), std::move(*DL));
}

const DataLayout &getDataLayout() const { return DL; }

LLVMContext &getContext() { return *Ctx.getContext(); }

Next we have a named constructor, Create, which will build a KaleidoscopeJIT instance that is configured to generate code for our host process. It does this by first generating a JITTargetMachineBuilder instance using that classes’ detectHost method and then using that instance to generate a datalayout for the target process. Each of these operations can fail, so each returns its result wrapped in an Expected value [3] that we must check for error before continuing. If both operations succeed we can unwrap their results (using the dereference operator) and pass them into KaleidoscopeJIT’s constructor on the last line of the function.

Following the named constructor we have the getDataLayout() and getContext() methods. These are used to make data structures created and managed by the JIT (especially the LLVMContext) available to the REPL code that will build our IR modules.

void addModule(std::unique_ptr<Module> M) {
  cantFail(CompileLayer.add(ES.getMainJITDylib(),
                            ThreadSafeModule(std::move(M), Ctx)));
}

Expected<ExecutorSymbolDef> lookup(StringRef Name) {
  return ES.lookup({&ES.getMainJITDylib()}, Mangle(Name.str()));
}

Now we come to the first of our JIT API methods: addModule. This method is responsible for adding IR to the JIT and making it available for execution. In this initial implementation of our JIT we will make our modules “available for execution” by adding them to the CompileLayer, which will it turn store the Module in the main JITDylib. This process will create new symbol table entries in the JITDylib for each definition in the module, and will defer compilation of the module until any of its definitions is looked up. Note that this is not lazy compilation: just referencing a definition, even if it is never used, will be enough to trigger compilation. In later chapters we will teach our JIT to defer compilation of functions until they’re actually called. To add our Module we must first wrap it in a ThreadSafeModule instance, which manages the lifetime of the Module’s LLVMContext (our Ctx member) in a thread-friendly way. In our example, all modules will share the Ctx member, which will exist for the duration of the JIT. Once we switch to concurrent compilation in later chapters we will use a new context per module.

Our last method is lookup, which allows us to look up addresses for function and variable definitions added to the JIT based on their symbol names. As noted above, lookup will implicitly trigger compilation for any symbol that has not already been compiled. Our lookup method calls through to ExecutionSession::lookup, passing in a list of dylibs to search (in our case just the main dylib), and the symbol name to search for, with a twist: We have to mangle the name of the symbol we’re searching for first. The ORC JIT components use mangled symbols internally the same way a static compiler and linker would, rather than using plain IR symbol names. This allows JIT’d code to interoperate easily with precompiled code in the application or shared libraries. The kind of mangling will depend on the DataLayout, which in turn depends on the target platform. To allow us to remain portable and search based on the un-mangled name, we just re-produce this mangling ourselves using our Mangle member function object.

This brings us to the end of Chapter 1 of Building a JIT. You now have a basic but fully functioning JIT stack that you can use to take LLVM IR and make it executable within the context of your JIT process. In the next chapter we’ll look at how to extend this JIT to produce better quality code, and in the process take a deeper look at the ORC layer concept.

Next: Extending the KaleidoscopeJIT

1.4. Full Code Listing

Here is the complete code listing for our running example. To build this example, use:

# Compile
clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core orcjit native` -O3 -o toy
# Run
./toy

Here is the code:

//===- KaleidoscopeJIT.h - A simple JIT for Kaleidoscope --------*- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// Contains a simple JIT definition for use in the kaleidoscope tutorials.
//
//===----------------------------------------------------------------------===//

#ifndef LLVM_EXECUTIONENGINE_ORC_KALEIDOSCOPEJIT_H
#define LLVM_EXECUTIONENGINE_ORC_KALEIDOSCOPEJIT_H

#include "llvm/ADT/StringRef.h"
#include "llvm/ExecutionEngine/Orc/CompileUtils.h"
#include "llvm/ExecutionEngine/Orc/Core.h"
#include "llvm/ExecutionEngine/Orc/ExecutionUtils.h"
#include "llvm/ExecutionEngine/Orc/ExecutorProcessControl.h"
#include "llvm/ExecutionEngine/Orc/IRCompileLayer.h"
#include "llvm/ExecutionEngine/Orc/JITTargetMachineBuilder.h"
#include "llvm/ExecutionEngine/Orc/RTDyldObjectLinkingLayer.h"
#include "llvm/ExecutionEngine/Orc/Shared/ExecutorSymbolDef.h"
#include "llvm/ExecutionEngine/SectionMemoryManager.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/IR/LLVMContext.h"
#include <memory>

namespace llvm {
namespace orc {

class KaleidoscopeJIT {
private:
  std::unique_ptr<ExecutionSession> ES;

  DataLayout DL;
  MangleAndInterner Mangle;

  RTDyldObjectLinkingLayer ObjectLayer;
  IRCompileLayer CompileLayer;

  JITDylib &MainJD;

public:
  KaleidoscopeJIT(std::unique_ptr<ExecutionSession> ES,
                  JITTargetMachineBuilder JTMB, DataLayout DL)
      : ES(std::move(ES)), DL(std::move(DL)), Mangle(*this->ES, this->DL),
        ObjectLayer(*this->ES,
                    []() { return std::make_unique<SectionMemoryManager>(); }),
        CompileLayer(*this->ES, ObjectLayer,
                     std::make_unique<ConcurrentIRCompiler>(std::move(JTMB))),
        MainJD(this->ES->createBareJITDylib("<main>")) {
    MainJD.addGenerator(
        cantFail(DynamicLibrarySearchGenerator::GetForCurrentProcess(
            DL.getGlobalPrefix())));
  }

  ~KaleidoscopeJIT() {
    if (auto Err = ES->endSession())
      ES->reportError(std::move(Err));
  }

  static Expected<std::unique_ptr<KaleidoscopeJIT>> Create() {
    auto EPC = SelfExecutorProcessControl::Create();
    if (!EPC)
      return EPC.takeError();

    auto ES = std::make_unique<ExecutionSession>(std::move(*EPC));

    JITTargetMachineBuilder JTMB(
        ES->getExecutorProcessControl().getTargetTriple());

    auto DL = JTMB.getDefaultDataLayoutForTarget();
    if (!DL)
      return DL.takeError();

    return std::make_unique<KaleidoscopeJIT>(std::move(ES), std::move(JTMB),
                                             std::move(*DL));
  }

  const DataLayout &getDataLayout() const { return DL; }

  JITDylib &getMainJITDylib() { return MainJD; }

  Error addModule(ThreadSafeModule TSM, ResourceTrackerSP RT = nullptr) {
    if (!RT)
      RT = MainJD.getDefaultResourceTracker();
    return CompileLayer.add(RT, std::move(TSM));
  }

  Expected<ExecutorSymbolDef> lookup(StringRef Name) {
    return ES->lookup({&MainJD}, Mangle(Name.str()));
  }
};

} // end namespace orc
} // end namespace llvm

#endif // LLVM_EXECUTIONENGINE_ORC_KALEIDOSCOPEJIT_H